| 润叶加料工序含水率控制及相关算法研究 |
| |
| 引用本文： | 杨燕平,叶正国,李斌.润叶加料工序含水率控制及相关算法研究[J].烟草科技,2011(9). |
| |
| 作者姓名： | 杨燕平 叶正国 李斌 |
| |
| 作者单位： | 红塔集团玉溪卷烟厂,云南省玉溪市红塔区红塔大道118号,653100 |
| |
| 摘 要： | 制丝生产线润叶加料工序在含水率控制过程中,采用传统的单闭环控制方式,仅凭操作人员的经验设定喷水量对物料进行加水,导致出口片烟含水率波动较大、控制失调,影响成品烟丝的内在质量.为此,采用带前馈-串级双闭环控制方式,对润叶加料工序的含水率控制及其控制算法进行了优化改进.该控制方式将来料含水率波动、加料比例、直喷蒸汽和温度等影响因素进行了精确的量化处理,并对其控制算法进行了改进完善,较好地解决了出口片烟含水率波动大的问题.实际运行效果表明,带前馈-串级控制系统是制丝生产过程中改善和提高片烟加工含水率稳定性的一种有效控制方案,改进后该工序点含水率控制合格率由原来的80％提高到99.8％以上,保证了成品烟丝质量.
|
| 关 键 词： | 润叶加料 含水率 单闭环控制 带前馈-串级双闭环控制 控制算法 |
Study on Moisture Content Control and Relevant Algorithm in Process of Ordering and Casing |
| |
| YANG YAN-PING,YE ZHENG-GUO,LI BIN.Study on Moisture Content Control and Relevant Algorithm in Process of Ordering and Casing[J].Tobacco Science & Technology,2011(9). |
| |
| Authors: | YANG YAN-PING YE ZHENG-GUO LI BIN |
| |
| Affiliation: | YANG YAN-PING,YE ZHENG-GUO,and LI BINYuxi Cigarette Factory,Hongta Tobacco Group Co.,Ltd.,Yuxi 653100,Yunnan,China |
| |
| Abstract: | In ordering cylinder with a traditional single closed-loop control system,the volume of injected water was set according to the operators' experiences,which resulted in wide fluctuation of moisture content in output strips.The control was replaced by a feedforward-cascaded double closed-loop control system,and the relevant control algorithm was optimized.The affecting factors,including fluctuation of moisture content in input tobacco,casing rate,injection steam,and temperature,were accurately quantitatively... |
| |
| Keywords: | Ordering and casing Moisture content Single closed-loop control Feedforward-cascaded double closed-loop control Control algorithm |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
