|
|||||
|
|
| 丝束卷曲特性与滤棒物理特性的关系 | |
| 引用本文： | 常纪恒,常建勇,盛培秀,石中金,郝瑞.丝束卷曲特性与滤棒物理特性的关系[J].烟草科技,2011(8). |
| 作者姓名： | 常纪恒 常建勇 盛培秀 石中金 郝瑞 |
| 作者单位： | 1. 郑州烟草研究院烟草行业烟草工艺重点实验室,郑州高新技术产业开发区枫杨街2号,450001 2. 河南省医药学校,河南省开封市体育路14号,475001 3. 南通烟滤嘴有限责任公司,江苏省南通市崇川区孩儿巷北路73号,226001 4. 黑龙江烟草工业有限责任公司,哈尔滨市南岗区一曼街104号,150001 |
| 摘 要： | 为寻找丝束卷曲特性对滤棒物理特性的影响,选用规格为7.3 dtex/5.1 ktex的聚丙烯丝束,分析了开松前、开松后、滤棒内部丝束的卷曲特性(卷曲度、卷曲弹性回复率)的变化,以及滤棒内丝束的卷曲特性对滤棒重量、吸阻和硬度的影响关系,结果表明:①棒内丝束的卷曲度直接影响滤棒的重量、吸阻和硬度；丝束在成型过程中卷曲度有所损失,而且棒内丝束卷曲度的损失量大于开松后丝束卷曲度的损失量.②在单丝线密度一定时,丝束卷曲度越高,所需的开松比越大；在滤棒重量一定时,卷曲度越高,滤棒硬度和吸阻值越高；在滤棒硬度能够满足卷烟生产要求时,卷曲度值越高滤棒重量越低.③卷曲弹性回复率与滤棒物理特性无直接影响关系. |
| 关 键 词： | 滤棒 重量 吸阻 硬度 丝束 卷曲度 卷曲弹性回复率 |
Relationships Between Tow Crimp and Physical Characteristics of Filter Rod |
|
| CHANG JI-HENG,CHANG JIAN-YONG,SHENG PEI-XIU,SHI ZHONG-JIN,HAO RUI.Relationships Between Tow Crimp and Physical Characteristics of Filter Rod[J].Tobacco Science & Technology,2011(8). | |
| Authors: | CHANG JI-HENG CHANG JIAN-YONG SHENG PEI-XIU SHI ZHONG-JIN HAO RUI |
| Affiliation: | CHANG JI-HENG(1),CHANG JIAN-YONG(2),SHENG PEI-XIU(3),SHI ZHONG-JIN(4),and HAO RUI(4) 1.Henan Pharmaceutical School,Kaifeng 475001,Henan,China 2.Key Laboratory of Tobacco Processing Technology,CNTC,Zhengzhou 450001,China 3.Nantong Cigarette Filter Co.,Ltd.,Nantong 226001,Jiangsu,China 4.Heilongjiang Tobacco Industrial Co.,Harbin 150001,China |
| Abstract: | In order to investigate the influence of tow crimp on the physical characteristics of filter rods,the change of tow's crimp and its resilience rate in filter rod were analyzed,and their relationships to the weight,draw resistance and hardness of filter rod were studied by taking polypropylene tow of 7.3dtex/5.1ktex as a sample.The results showed that: 1) the crimp of tow in filter rods affected the weight,draw resistance and hardness of filter rod directly.Crimp reduced to some extent in the process of rod ... |
| Keywords: | Filter rod Weight Draw resistance Hardness Tow Crimp Resiliency of crimp |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |