| 超高压海水泵配流阀动态特性仿真研究 |
| |
| 引用本文： | 韦春辉,冀宏,张培珍,刘世琦,朱奕. 超高压海水泵配流阀动态特性仿真研究[J]. 液压气动与密封, 2020, 0(3): 10-13 |
| |
| 作者姓名： | 韦春辉 冀宏 张培珍 刘世琦 朱奕 |
| |
| 作者单位： | 兰州理工大学能源与动力工程学院;甘肃省液压气动工程技术研究中心 |
| |
| 基金项目： | 国家重点研发计划(2016YFC0304800) |
| |
| 摘 要： | 针对超高压海水泵配流阀运动滞后所引起海水泵容积效率降低的问题。分析了导致配流阀滞后的主要原因,建立了数学模型,运用AEMSim软件进行仿真。研究结果表明:随着余隙容积的增大,配流阀开启滞后现象越明显。随着吸液阀阀芯质量增加,对阀芯开启滞后影响较小,关闭滞后影响较大。在设计超高压海水泵时,要尽量减小柱塞腔的余隙容积和减小配流阀阀芯质量。
|
| 关 键 词： | 超高压 海水泵 配流阀 动态特性 |
Dynamic Characteristics of Distributing Valves in Super-high Pressure Seawater Pump |
| |
| WEI Chun-hui,JI Hong,ZHANG Pei-zhen,LIU Shi-qi,ZHU Yi. Dynamic Characteristics of Distributing Valves in Super-high Pressure Seawater Pump[J]. Hydraulics Pneumatics & Seals, 2020, 0(3): 10-13 |
| |
| Authors: | WEI Chun-hui JI Hong ZHANG Pei-zhen LIU Shi-qi ZHU Yi |
| |
| Affiliation: | (College of Energy and Power Engineeong,Lanzhou University of Technology,Lanzhou 730050,China;Research Centar for Hydraulics and Pneumatics of Gansu Province,Lanzhou 730050,China) |
| |
| Abstract: | Focus on the problem that the volume efficiency of the super-high seawater pump decreases due to the lag of the valve movement of super high pressure seawater pump.The main reasons leading to the lag of the valve are analyzed,and the mathematical model is established.The simulation is carried out by using AEMSim software.The results show that with the increase of clearance volume,the opening lag of distributing valves becomes more obvious.With the mass of the suction valve spool increases,the influence on the opening lag of the spool is small,and the closing lag has a greater influence.When designing the super-high pressure seawater pump,the clearance volume of the plunger cavity and the mass of the pool should be reduced as much as possible. |
| |
| Keywords: | super-high pressure seawater pump distributing valves dynamic characteristics |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
