首页 | 本学科首页   官方微博 | 高级检索  
     

基于FPGA的通信接口模块设计与实现
引用本文:张伟. 基于FPGA的通信接口模块设计与实现[J]. 电子科技, 2012, 25(7): 95-98
作者姓名:张伟
作者单位:中国电子科技集团公司第20研究所雷达事业部,陕西西安,710068
摘    要:针对前端射频及信号处理部分与中心机需要进行远程通信的需要,设计了一款由FPGA实现的通信接口模块。该模块实现了射频及信号处理部分与中心机的通信,包括中心机发给前端受控模块的控制命令;前端受控模块发送给中心机的状态信息;中心机控制通信接口模块实现信息转发控制的命令。通过仿真分析,该通信接口模块能够完成远程数据传输的功能。

关 键 词:光纤通信  同步串行通信  通用异步串行  FPGA

Design and Implementation of Communication Interface Module Based on FPGA
ZHANG Wei. Design and Implementation of Communication Interface Module Based on FPGA[J]. Electronic Science and Technology, 2012, 25(7): 95-98
Authors:ZHANG Wei
Affiliation:ZHANG Wei (Radar Division,No.20 Research Institute of China Electronics Technology Group Corporation,Xi’an 710068,China)
Abstract:A communication Interface module is designed for the requirement of long range communication between the radio and the signal processing cell and central control machine.The module accomplishes three kinds of communication,including the control command which the central control machine sends to the front controlled module,the status information which the front controlled module sends to the central control machine and the command which the central control machine controls the communication Interface module to implement the information transmission.Simulation shows that the communication Interface module can fulfill the function of long range data transmission.
Keywords:optical fiber communication  synchronous serial communication  UART  FPGA
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号