| 用坐标磨床磨削增韧陶瓷的试验研究 |
| |
| 引用本文： | 田欣利,徐燕申.用坐标磨床磨削增韧陶瓷的试验研究[J].中国机械工程,1995,6(1):60-61. |
| |
| 作者姓名： | 田欣利 徐燕申 |
| |
| 作者单位： | 天津大学机械系 |
| |
| 基金项目： | 国家“八五”重点科技攻关项目 |
| |
| 摘 要： | 采用坐标磨床磨削试件内孔，与九川普通陶瓷对比发现，ＺＴＭ材料随磨削速度和材料去除率的提高其粗糙度明显降低，电镀砂轮比树脂砂轮磨削效率高，砂轮特性对砂轮磨削效果影响较大。
|
| 关 键 词： | 增韧陶瓷 坐标磨床 内圆磨削 陶瓷加工 |
Experimental Sutdy of Grinding Toughened Ceramics by Coordinate Grinder |
| |
| Tian Xinli,Xu Yansheng,Lin Bin,et al..Experimental Sutdy of Grinding Toughened Ceramics by Coordinate Grinder[J].China Mechanical Engineering,1995,6(1):60-61. |
| |
| Authors: | Tian Xinli Xu Yansheng Lin Bin |
| |
| Affiliation: | Tian Xinli;Xu Yansheng;Lin Bin;et al. |
| |
| Abstract: | Experimental study is investigated to grinding properties of toughened ceramics.The workpiece internal is ground using coordinate grinder.Several ordinary ceramic materials are comparied with ZTM,its are found that ZTM workpiece's roughness obviously descend with the increment of the grinding speed and material removal rate.The grinding efficiency of clectro plated wheel is higher than resin wheel. Wheel specification's affection to grinding effect is obvious. |
| |
| Keywords: | toughened ceramic coordinate grinder internal grinding ceramic machining |
| 本文献已被 CNKI 维普 等数据库收录！ |
