| Al-Cu合金定向凝固脉冲磁场分布数值模拟 |
| |
| 引用本文： | 牛晓武,赵志龙,刘林. Al-Cu合金定向凝固脉冲磁场分布数值模拟[J]. 机械设计与制造, 2006, 0(6): 75-77 |
| |
| 作者姓名： | 牛晓武 赵志龙 刘林 |
| |
| 作者单位： | 西北工业大学,机电学院,西安,710072 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| |
| 摘 要： | 采用ANSYS8.0有限元软件对脉冲磁场作用下的Al-Cu合金定向凝固磁场分布作了数值模拟。并对脉冲磁场强度进行了实验测量。结果表明:在合金试样中心附近磁感应强度较强,而在端部较弱。模拟结果和实验测得结果相符合。通过数值模拟,可以初步了解定向凝固过程中的磁场分布状态,而且有助于进一步研究凝固组织细化的原因。
|
| 关 键 词： | 定向凝固 脉冲磁场 数值模拟 |
| 文章编号： | 1001-3997(2006)06-0075-02 |
| 收稿时间： | 2005-08-18 |
| 修稿时间： | 2005-08-18 |
Numerical simulation of pulsed magnetic field distribution of Al- Cu alloy directional solidification |
| |
| NIU Xiao-wu,ZHAO Zhi-long,LIU Lin. Numerical simulation of pulsed magnetic field distribution of Al- Cu alloy directional solidification[J]. Machinery Design & Manufacture, 2006, 0(6): 75-77 |
| |
| Authors: | NIU Xiao-wu ZHAO Zhi-long LIU Lin |
| |
| Abstract: | A numerical simulation of magnetic field distribution characteristic of Al-Cu alloy directional solidification under applied pulsed magnetic field was carried out with ANSYS 8.0 in the present paper.The intensity of pulsed magn etic fielol was alsotested.The results showed that magnetic induction intensity was strong in the middle of the sample and small in the end. The simulation results were in good agreement with the experimental data. It was found that, through the numerical simulation, not only the magnetic field distribution but also the mechanism of the refinement for the solidification structure could be elementally understood. |
| |
| Keywords: | ANSYS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
