| 负载下钢结构构件增大截面加固设计方法对比分析 |
| |
| 引用本文： | 祝瑞祥,王元清,戴国欣,施 刚.负载下钢结构构件增大截面加固设计方法对比分析[J].四川建筑科学研究,2014(1):98-103. |
| |
| 作者姓名： | 祝瑞祥 王元清 戴国欣 施 刚 |
| |
| 作者单位： | [1] 中国联合工程公司,浙江杭州310022 [2] 清华大学土木工程系,土木工程安全与耐久教育部重点实验室,北京100084 [3] 重庆大学土木工程学院,重庆400045 |
| |
| 基金项目： | “十一五”国家科技支撑计划重大项目课题（2006BAJ03A02） |
| |
| 摘 要： | 现今,负载下焊接增大截面加固钢结构构件的方法在加固工程中的应用已经非常普遍,但是关于这方面的研究很少.目前除了前苏联的《改建企业钢结构加固计算建议》,只有中国有两个钢结构加固技术的规范或规程,即CECS 77∶ 96《钢结构加固技术规范》和YB 9257-96《钢结构检测评定及加固技术规程》.本文将对这两本规范或规程中关于增大截面法加固钢构件的设计方法进行分析比较,并结合相关的实例分析,对计算结果进行分析比较,同时找出已有规范的差异与不足,为今后的研究和规范修订提供参考和科学依据.
|
| 关 键 词： | 钢结构 加固 负载下 设计规范 应力比 |
Comparative study on design methods for steel structural members strengthened by increasing the section area while under load in different codes |
| |
| ZHU Ruixiang,WANG Yuanqing,DAI Guoxin,SHI Gang.Comparative study on design methods for steel structural members strengthened by increasing the section area while under load in different codes[J].Building Science Research of Sichuan,2014(1):98-103. |
| |
| Authors: | ZHU Ruixiang WANG Yuanqing DAI Guoxin SHI Gang |
| |
| Affiliation: | 2 ( 1. China United Engineering Corporation, Hangzhou 310022, China; 2. Department of Civil Engineering, Tsinghua University, Key Laboratory of Civil Engineering Safety and Durability of China Education Ministry, Beijing 100084, China; 3. Faculty of Civil Engineering, Chongqing University, Chongqing 400045, China) |
| |
| Abstract: | Nowadays, the method of strengthening steel structural members by increasing the section and welding while under load has been commonly used to strengthen steel structural members in the application of reinforcement project, but it lacks relevant study. Until now,in addition to ＂Suggestion for Calculation of Reconstruction of Enterprise and Strengthening of Steel Structures＂ in the Soviet Union, there are two standards of reinforcement technology, CECS 77 ： 96 ＂Technical Specification for Strengthening Steel Structures＂ and YB 9257--96 ＂Technical Specification for Inspection, Assessment and Strengthening of Steel Structures＂. The design methods of strengthening steel members by increasing the section in these two specifications were compared and analyzed in this paper, and the related examples in calculations were given and the designing results were compared. Finally, the differences and shortages of the codes were found out to provide references and scientific basis for congener research and amendment of codes in future. |
| |
| Keywords: | steel structure strengthening under load design codes stress ratio |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
