| 滚针轴承外圈滚道宽度测量方法的改进 |
| |
| 引用本文： | 王喜荣,王修成,王晶.滚针轴承外圈滚道宽度测量方法的改进[J].哈尔滨轴承,2012(1):51-52. |
| |
| 作者姓名： | 王喜荣 王修成 王晶 |
| |
| 作者单位： | [1]哈尔滨轴承配件有限公司钢球分厂,黑龙江哈尔滨150036 [2]中航工业哈尔滨轴承有限公司研发中心,黑龙江哈尔滨150036 |
| |
| 摘 要： | 滚针轴承外圈宽度通常通过手指塞规进行检测,由于滚针轴承外圈内部空间狭小,用手检测很不方便且效率低。针对以上问题,将宽度塞规装上手柄,代替手进入外圈内部测量滚道宽度,使测量简便、效率高。
|
| 关 键 词： | 滚针轴承 滚道宽度 夹持手柄 滚道宽度塞规 测量 |
Measuring method improvement on outer ring raceway width of needle roller bearing |
| |
| Wang Xirong,Wang Xiucheng,Wang Jing.Measuring method improvement on outer ring raceway width of needle roller bearing[J].JOurnal of Harbin Bearing,2012(1):51-52. |
| |
| Authors: | Wang Xirong Wang Xiucheng Wang Jing |
| |
| Affiliation: | 1.Steel Ball Sub-factory,Harbin Bearing Parts Co.,Ltd.,Harbin 150036,China;2.Bearing R&D Center,AVIC Harbin Bearing Co.,Ltd.,Harbin 150036,China) |
| |
| Abstract: | The width of the tapered roller bearing outer ring is usually tested by finger gauge.However,due to the narrow space in the needle roller bearing outer ring,this method is very inconvenient and of low effectiveness.Aimed at the problems above,width gauge fixed on a handle and using it instead of hand to measure the width of the raceway of the interior of outer ring to make the measurement simple and effective. |
| |
| Keywords: | tapered bearing width of race way clamped handle width gauge of race way measurement |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
