| 角接触球轴承装配工序的技术质量分析 |
| |
| 引用本文： | 蒙延伟,杨晓慧,钟媛.角接触球轴承装配工序的技术质量分析[J].哈尔滨轴承,2012(2):48-49. |
| |
| 作者姓名： | 蒙延伟 杨晓慧 钟媛 |
| |
| 作者单位： | [1]哈尔滨轴承集团公司南直轴承分厂,黑龙江哈尔滨150036 [2]中航工业哈尔滨轴承有限公司研发中心,黑龙江哈尔滨150036 |
| |
| 摘 要： | 角接触球轴承装配时,只需径向游隙合格。通过加热外圈等方法,可方便地将钢球、保持架与内、外圈装配在一起。轴承装配前要重点控制锁口尺寸的大小,既要防止组装困难,又要防止轴承散套。一般锁口尺寸通过磨加工来保证。
|
| 关 键 词： | 角接触球轴承 接触角 锁口尺寸 装配质量 |
Technical quality analysis of assembling procedure for angle contact ball bearings |
| |
| Meng Yanwei,Yang Xiaohui,Zhong Yuan.Technical quality analysis of assembling procedure for angle contact ball bearings[J].JOurnal of Harbin Bearing,2012(2):48-49. |
| |
| Authors: | Meng Yanwei Yang Xiaohui Zhong Yuan |
| |
| Affiliation: | 1.Nanzhi Bearing Sub-factoring,Harbin Bearing Group Corporation,Harbin 150036,China;2.Bearing R&D Center,AVIC Harbin Bearing Co.,Ltd.,Harbin 150036,China) |
| |
| Abstract: | Assembly of angle contact ball bearings has only to qualify Radial clearance.Ball,cage and inner and outer rings can be easily assembled together by means of heating outer ring.It is significant for controlling slot size prior to assembly of bearings so as to avoid difficulty of assembly and looseness of bearings.Slot size is usually assured through grinding. |
| |
| Keywords: | angle contact ball bearing contact angle slot size assembly quality |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
