| TP2管气泡原因浅析 |
| |
| 引用本文： | 丁顺德.TP2管气泡原因浅析[J].有色金属加工,2007,36(6):36-38,56. |
| |
| 作者姓名： | 丁顺德 |
| |
| 作者单位： | 中铝洛阳铜业有限公司,河南洛阳,471039 |
| |
| 摘 要： | 磷脱氧铜TP2管材在加工过程中极易出现气泡缺陷。本文通过系统的工艺试验，研究了氧含量、磷含量、气体含量、锭坯表层质量、轧制管坯扒皮工艺等因素对气泡的影响，分析了TP2管材气泡缺陷的规律和产生原因，并对TP2管材的工艺优化进行了初步探索。
|
| 关 键 词： | TP2合金 气泡 表面质量 |
| 文章编号： | 1671-6795（2007）06-0036-04 |
| 收稿时间： | 2007-09-03 |
| 修稿时间： | 2007年9月3日 |
Analysis of Bulb on surface of TP2 Tube |
| |
| DING Shun-de.Analysis of Bulb on surface of TP2 Tube[J].Nonferrous Metals Processing,2007,36(6):36-38,56. |
| |
| Authors: | DING Shun-de |
| |
| Abstract: | The bulbs are easily come into being on the surface of phosphorus-deoxidized TP2 copper tubes during processing. In this paper, the influences of oxygen content, phosphorus content, gas, ingot surface quality and tube peeling on the bulbs are studied systematically by means of process experiments, the rules and causations about the bulbs are analyzed, and the process optimization of TP2 copper tube is discussed. |
| |
| Keywords: | TP2 copper tube bulb surface quality |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
