| 可调板式楔横轧机 |
| |
| 引用本文： | 宋玉泉,李志刚,王明辉,宋家旺. 可调板式楔横轧机[J]. 中国机械工程, 2007, 18(1): 1-4 |
| |
| 作者姓名： | 宋玉泉 李志刚 王明辉 宋家旺 |
| |
| 作者单位： | 吉林大学,长春,130025 |
| |
| 基金项目： | 国家科技攻关项目;面向21世纪教育振兴行动计划(985计划) |
| |
| 摘 要： | 现有的辊式楔横轧机刚度好，但模具加工复杂且成形精度差，而板式楔横轧机模具加工简单且成形精度好，但刚度差。针对板压滚动塑性精成形机（发明专利95109500．5）存在模板距离调整不方便以及氧化皮难以清除等问题，设计了可调板式楔横轧机，详细介绍了可调板式楔横轧机的结构、检测与控制系统。
|
| 关 键 词： | 楔横轧 板式 可调 近净 |
| 文章编号： | 1004-132X（2007）01-0001-04 |
| 修稿时间： | 2006-07-17 |
Adjustable Flat Wedge Cross Rolling Machine |
| |
| Song Yuquan,Li Zhigang,Wang Minghui,Song Jiawang. Adjustable Flat Wedge Cross Rolling Machine[J]. China Mechanical Engineering, 2007, 18(1): 1-4 |
| |
| Authors: | Song Yuquan Li Zhigang Wang Minghui Song Jiawang |
| |
| Affiliation: | Jilin University, Changchun, 130025 |
| |
| Abstract: | Due to the stiffness of the cross wedge rolling machine is high,but the die machining is difficult and the forming precision is low; while the die machining of the flat wedge cross rolling machine is easy and the forming precision is high, but the stiffness is low. So the principles and design of the Plate-rolling Plastic Precise Forming Machine were brought forward. Furthermore, for the primary problem in the above machine, the improvement of the machine was expatiated with solving the difficulty of the distance adjustment between the upper template and the under template, the descaling and the safety apparatus, etc. Lastly, the design of the measuring and control system was introduced. |
| |
| Keywords: | cross wedge rolling flat wedge adjustable net-near |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
