| "插套式"先复位机构的注塑模设计 |
| |
| 引用本文： | 郭新玲."插套式"先复位机构的注塑模设计[J].工程塑料应用,2008,36(3):63-65. |
| |
| 作者姓名： | 郭新玲 |
| |
| 作者单位： | 陕西工业职业技术学院,咸阳,712000 |
| |
| 摘 要： | 介绍"插套式"先复位机构的结构组成及其工作原理,并通过实例分析了这种先复位机构的具体应用。经生产验证,采用这种先复位机构可使注塑模具结构简单、紧凑,动作可靠,使用效果好。
|
| 关 键 词： | 先复位机构 注塑模具 抽芯机构 推出机构 干涉 |
| 收稿时间： | 2007-12-23 |
| 修稿时间： | 2007年12月23 |
DESIGN OF INJECTION MOULD WITH SLEEVE ADVANCE RETURN MECHANISM |
| |
| Cuo Xinling.DESIGN OF INJECTION MOULD WITH SLEEVE ADVANCE RETURN MECHANISM[J].Engineering Plastics Application,2008,36(3):63-65. |
| |
| Authors: | Cuo Xinling |
| |
| Abstract: | The structure design and working principle of sleeve advance return mechanism were introduced.The practical application of this structure was analyzed by example.The application showed that the mould structure was simple,the structure was compact,the operation was reliable and the using result was good by using this advance return mechanism. |
| |
| Keywords: | advance return mechanism injection mould core-drawing mechanism ejector mechanism interference |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
