| 超低碳贝氏体钢的组织与力学性能研究 |
| |
| 引用本文： | 李继亮,陈士平,穴俊莲. 超低碳贝氏体钢的组织与力学性能研究[J]. 宽厚板, 2011, 17(4): 22-25 |
| |
| 作者姓名： | 李继亮 陈士平 穴俊莲 |
| |
| 作者单位： | 济钢集团国际工程技术有限公司 |
| |
| 摘 要： | 采用RPC工艺轧制三种不同成分的超低碳贝氏体钢,用光学金相显微镜对轧态组织进行观察和分析,研究轧态下的组织和力学性能,并对三种试样的组织和力学性能进行对比。对轧态试样进行扫描及能谱分析,评定钢中非金属夹杂物,目的在于开发一种综合性能良好的超低碳贝氏体钢。
|
| 关 键 词： | 超低碳贝氏体钢 组织 力学性能 |
Study on Microstructures and Mechanical Properties of Ultra Low Carbon Bainitic Steel |
| |
| Li Jiliang,Chen Shiping,Xue Junlian. Study on Microstructures and Mechanical Properties of Ultra Low Carbon Bainitic Steel[J]. Wide and Heavy Plate, 2011, 17(4): 22-25 |
| |
| Authors: | Li Jiliang Chen Shiping Xue Junlian |
| |
| Affiliation: | Li Jiliang,Chen Shiping and Xue Junlian(Jigang International Engineering and Technology Co.) |
| |
| Abstract: | The as-rolled microstructures of three ultra low carbon bainitic steel grades of different composition produced by RPC rolling process are observed and analyzed by means of optical metallographic microscope in order to reveal the effect of as-rolled microstructures and mechanical properties,and comparison is also made on the microstructures and mechanical properties of the specimens from the three steel grades.Assessment of non-metallic inclusions in the steel is performed by means of scanning and energy sp... |
| |
| Keywords: | Ultra low carbon bainitic steel Microstructures Mechanical properties |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
