| 蒸发器传热管堵管判据的研究 |
| |
| 引用本文： | 李思源,唐毅,聂勇,惠虎,李培宁.蒸发器传热管堵管判据的研究[J].压力容器,2008,25(2):13-17. |
| |
| 作者姓名： | 李思源 唐毅 聂勇 惠虎 李培宁 |
| |
| 作者单位： | 1. 核动力运行研究所,湖北,武汉,430223
2. 华东理工大学,上海,200237 |
| |
| 摘 要： | 以传热管缺陷的伤深比α和当量长度比γ为参量，利用爆破压力拟合计算公式和强度条件，导出了含缺陷传热管的安全评定判据和堵管条件，提出了传热管在役检查的验收判据和堵管条件。
|
| 关 键 词： | 蒸发器传热管 缺陷 安全评定 验收判据 堵管条件 |
| 文章编号： | 1001-4837（2008）02-0013-05 |
| 收稿时间： | 2007-11-07 |
| 修稿时间： | 2008-01-07 |
Investigation of Plugging Criteria of Steam Generator Tubing |
| |
| LI Si-yuan,TANG Yi,NIE Yong,HUI Hu,LI Pei-ning.Investigation of Plugging Criteria of Steam Generator Tubing[J].Pressure Vessel Technology,2008,25(2):13-17. |
| |
| Authors: | LI Si-yuan TANG Yi NIE Yong HUI Hu LI Pei-ning |
| |
| Affiliation: | LI Si - yuan , TANG Yi, NIE Yong, HUI Hu, LI Pei - ning ( 1. Research Institute of Nuclear Power Operation, Wuhan 430223, China; 2. East China University of Science and Technology,Shanghai 200237, China) |
| |
| Abstract: | The safety evaluation criteria of steam generator tubing with defects and the plugging criteria are derived while using the fit function deduced by the burst pressure and strength criteria; finally, the acceptance criteria and plugging criteria of steam generator tubing are presented according to the in - service inspection period. |
| |
| Keywords: | steam generator tubing defect safety assessment acceptance criteria plugging criteria |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
