Observation of melt fracture of polypropylene resins in capillary flow

Melt fracture, shear viscosity, extensional viscosity, and die swell of two polypropylene resins were studied using a capillary rheometer. A modified Bagley plot with consideration of pressure effects on melt viscosity and end effect was used. From the true wall shear stress the shear viscosity was calculated. Extensional viscosity was calculated from the end effect. Both shear and extensional viscosities of different molecular weights and temperatures correlated well under the time-temperature Williams-Landel-Ferry (WLF) superposition. Die swell increased when shear stress increased, and was higher for shorter dies at a given shear rate. When shear rates increased the extrudate staged from smooth to gross melt fracture with regular patterns (spurt), and then turned into irregular shapes. In the regular stage the wavelength of extrudates was measured, and corresponding frequency was calculated. The frequency increased when molecular weight decreased and when melt temperature increased. The shift factor based on shear viscosity also brought frequency data of different molecular weights and temperatures into master curves. The frequency decreased slightly when die lengths increased from L/R=10 to 60. A small maximum was observed when shear rates increased.