| UV光固化注射成型工艺实验研究 |
| |
| 引用本文： | 常乐,丁玉梅,杨卫民,谢鹏程.UV光固化注射成型工艺实验研究[J].中国塑料,2014,28(6):77-81. |
| |
| 作者姓名： | 常乐 丁玉梅 杨卫民 谢鹏程 |
| |
| 作者单位： | 1. 北京化工大学2. 北京化工大学英蓝实验室 |
| |
| 摘 要： | 在传统注射成型工艺的基础上，对模内“光化学制造”工艺参数进行实验研究，分析得到UV材料温度、保压压力对制品精度的影响。其中，利用成型制品平均质量评价UV光固化制品整体成型质量精度。此外，采用横截面图形比较法对制品微结构形态质量进行评价。结果表明，UV光固化注射成型具有替代热塑性材料注射成型方面的可行性。
|
| 关 键 词： | 注射成型 光固化 制品精度 温度 保压压力 |
| 收稿时间： | 2013-09-26 |
The experimental research for the process of UV curing injection molding |
| |
| Abstract: | Based on traditional injection molding process, parameters for UV curing injection molding were studied and the effect of temperature and pressure on the precision of products was analyzed. Overall precision of UV curing products was measured by the average weigh of the molded products. In addition, the microstructure was evaluated through comparing the cross section of the products. The experimental indicated that UV curing injection molding was well feasible. |
| |
| Keywords: | injection molding curing product precision temperature holding pressure |
|
| 点击此处可从《中国塑料》浏览原始摘要信息 |
|
点击此处可从《中国塑料》下载全文 |
|
