| 机床修理中齿轮副侧隙的控制 |
| |
| 引用本文： | 田春雨. 机床修理中齿轮副侧隙的控制[J]. 中国制造业信息化, 1997, 0(3) |
| |
| 作者姓名： | 田春雨 |
| |
| 作者单位： | 资阳内燃机车厂!四川资阳641301 |
| |
| 摘 要： | 机床修理中,单件生产的齿轮副装配时,实际的法向侧隙可能超标.本文采取的措施,可在不提高齿轮及相关零件精度的前提下,减小可能产生的最大法向侧隙,以提高系统的传动质量.
|
| 关 键 词： | 齿轮副 机床修理 侧隙 |
Control of the Backlash of the Gear Pair in Repairing machine tools |
| |
| Tian Chunyu. Control of the Backlash of the Gear Pair in Repairing machine tools[J]. Manufacture Information Engineering of China, 1997, 0(3) |
| |
| Authors: | Tian Chunyu |
| |
| Abstract: | In repairing machine tools and the assembling single-producted gear pair, the real normal backlash may go beyond the scope. The measure used in the paper can reduce the possible maximum normal backlash while unnecessarily improves the precision of the gear and related parts, then improves the driving quality of the system. |
| |
| Keywords: | Gear pair repairing machine tools Backlash |
| 本文献已被 CNKI 等数据库收录！ |
|
