| HTC手机保护套注塑模设计 |
| |
| 引用本文： | 孟少明,陈晨. HTC手机保护套注塑模设计[J]. 塑料科技, 2013, 0(3): 74-76 |
| |
| 作者姓名： | 孟少明 陈晨 |
| |
| 作者单位： | 湖南化工职业技术学院 |
| |
| 摘 要： | 分析了手机保护套的成型工艺,详细阐述了手机保护套注塑模结构设计要点与工作过程,模具采用了三板模结构、点浇口进料、成型推杆推出、斜楔自动抽芯机构,可大幅度提高模具使用寿命和可靠性,实践证明模具结构合理,脱模顺利,塑件质量满足要求。
|
| 关 键 词： | 手机保护套 注塑模 结构设计 脱模 |
Design of Injection Mold for the HTC Mobile Phone Protective Cover |
| |
| Meng Shaoming,Chen Chen. Design of Injection Mold for the HTC Mobile Phone Protective Cover[J]. Plastics Science and Technology, 2013, 0(3): 74-76 |
| |
| Authors: | Meng Shaoming Chen Chen |
| |
| Affiliation: | Hunan Chemical Vocational Technical College,Zhuzhou 412004,China |
| |
| Abstract: | The mobile phone protective cover molding process was analyzed,the key of phone protective cover injection mold structure design and working process were elaborated,the mold was employed with a three-plate mold structure,the feed point gate,forming ejecting mechanism,automatic core puller with wedge,which can improve the service life and reliability of mold greatly.The practices prove that the mold is reasonable in structure,smoothly in ejection,and the quality of the plastic parts meets the requirements. |
| |
| Keywords: | Mobile phone protective cover Injection mold Structure design Ejection |
| 本文献已被 CNKI 等数据库收录！ |
|
