| 死区模式对双极性PWM调速系统的影响 |
| |
| 引用本文： | 梁荣,郑殿臣,徐永向,邹继斌.死区模式对双极性PWM调速系统的影响[J].微电机,2011(12):64-67,91. |
| |
| 作者姓名： | 梁荣 郑殿臣 徐永向 邹继斌 |
| |
| 作者单位： | 哈尔滨工业大学电气工程系; |
| |
| 摘 要： | 在双极性PWM调制方式中,为了防止桥臂的直通需要在互补的上下桥臂驱动信号上设置死区。利用硬件电路设置死区的方式具有设置简单、可靠性高的优点,常被应用在集成驱动模块中,然而不同的死区模式会对逆变器输出电压产生不同的影响。本文针对一种硬件死区设置方式在特定占空比附近输出电压跃变而造成电机转速非线性的问题进行分析,并给出了改进硬件电路和软件补偿两种解决措施。仿真和实验结果表明这两种方法都能够很好的解决在特定占空比附近输出电压跃变的问题,使转速能够在占空比改变时平稳变化。
|
| 关 键 词： | 死区设置方式 双极性调制 电压跃变 非线性 |
Influence of Dead-Time Mode on Speed Control System Using Bipolar Pulse Width Modulation |
| |
| LIANG Rong,ZHENG Dianchen,XU Yongxiang,ZOU Jibin.Influence of Dead-Time Mode on Speed Control System Using Bipolar Pulse Width Modulation[J].Micromotors,2011(12):64-67,91. |
| |
| Authors: | LIANG Rong ZHENG Dianchen XU Yongxiang ZOU Jibin |
| |
| Affiliation: | LIANG Rong,ZHENG Dianchen,XU Yongxiang,ZOU Jibin(Department of Electrical Engineering,Harbin Institute of Technology,Harbin 150001,China) |
| |
| Abstract: | In bipolar pulse width modulation(PWM),time delay must be inserted in complement switching signals to prevent the short circuit in the DC link.Hardware dead-time setting circuits are widely used due to their simpleness and high reliability.This paper investigated the influence of a dead-time setting mode on inverter outputs in bipolar PWM modulation,and an improved hardware dead-time setting circuit and software compensation method were both presented to solve the problem of nonlinear output speed in a spee... |
| |
| Keywords: | dead-time setting mode bipolar PWM modulation voltage leap nonlinearity |
| 本文献已被 CNKI 等数据库收录！ |
|
