| 微细电解线切割加工控制系统 |
| |
| 引用本文： | 王昆,朱荻,张朝阳.微细电解线切割加工控制系统[J].机械科学与技术(西安),2007,26(7):845-849. |
| |
| 作者姓名： | 王昆 朱荻 张朝阳 |
| |
| 作者单位： | 南京航空航天大学机电学院,南京210016 |
| |
| 摘 要： | 微细电解线切割加工是一种微细加工新方法。本文基于电化学原理,分析了微细电解线切割加工控制系统的要求,利用虚拟仪器设备搭建了加工控制系统,并在Labwindows/CVI软件平台上设计了控制系统软件。本系统通过控制线电极按照DXF图形文件中的轨迹伺服进给,电解腐蚀工件材料达到制造微小零件的目的。试验表明本系统具有稳定可靠、硬件简单、灵活性好等特点。
|
| 关 键 词： | 微细电解线切割加工 Labwindows/CVI 虚拟仪器 控制系统 |
| 文章编号： | 1003-8728（2007）07-0845-05 |
| 修稿时间： | 2006-06-27 |
Control System of Wire Electrochemical Micro-Machining |
| |
| Wang Kun,Zhu Di,Zhang Zhaoyang.Control System of Wire Electrochemical Micro-Machining[J].Mechanical Science and Technology,2007,26(7):845-849. |
| |
| Authors: | Wang Kun Zhu Di Zhang Zhaoyang |
| |
| Affiliation: | College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016 |
| |
| Abstract: | Wire electrochemical micro-machining(WEMM) is a new method of micro-machining.We analyze the requirements for its control system using the electrochemical principle,build its control system with virtual instruments and design the software for the control system with the Labwindows/CVI software.To manufacture micro-parts,the control system controls the wire electrode through servo feeding the trajectory in the format of a DXF graph file and electrochemically etching the materials of a workpiece.Experimental results show that the control system has the advantages of good reliability,simple hardware requirement and flexibility. |
| |
| Keywords: | wire electrochemical micro-machining(WEMM) Labwindows/CVI virtual instrument control system |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
