| 一种新型槽轮机构的设计与应用研究 |
| |
| 引用本文： | 成刚虎,张磊,詹磊.一种新型槽轮机构的设计与应用研究[J].机械科学与技术(西安),2007,26(11):1429-1433. |
| |
| 作者姓名： | 成刚虎 张磊 詹磊 |
| |
| 作者单位： | 西安理工大学印刷包装工程学院 西安710048(成刚虎，张磊)，广西大学轻工与食品工程学院 南宁530004(詹磊) |
| |
| 摘 要： | 通过机构运动分析,从机构学及工程应用的角度揭示了曲线槽轮的固有缺陷和设计瓶颈;提出具有组合轮廓线的新型槽轮机构,分析了机构的设计思想、要点及设计方法;采用Pro/E对改进后的机构实现运动仿真,结果表明新机构消除了拨销进入槽轮瞬时的柔性冲击。
|
| 关 键 词： | 曲线槽轮 组合轮廓线 柔性冲击 |
| 文章编号： | 1003-8728（2007）11-1429-05 |
| 修稿时间： | 2006-12-28 |
Design and Application of a New Geneva Mechanism |
| |
| Cheng Ganghu,Zhang Lei,Zhan Lei.Design and Application of a New Geneva Mechanism[J].Mechanical Science and Technology,2007,26(11):1429-1433. |
| |
| Authors: | Cheng Ganghu Zhang Lei Zhan Lei |
| |
| Abstract: | The intrinsic defects and design bottle-neck of a geneva mechanism with curved slots are pointed out through motive analysis from the aspect of mechanism and engineering application.A new geneva mechanism with combined contour curves is proposed,and its design method is presented.The kinematics simulation is described by Pro/E,and the result indicates that the new mechanism can eliminate the flexible impact when the pin wheel enters the geneva. |
| |
| Keywords: | geneva mechanism with curved slots combined contour curves flexible impact |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
