| 基于构件复用技术的新产品开发研究 |
| |
| 引用本文： | 李斌,黄正东,陈立平,钟毅芳. 基于构件复用技术的新产品开发研究[J]. 机械科学与技术, 2007, 26(1): 131-134 |
| |
| 作者姓名： | 李斌 黄正东 陈立平 钟毅芳 |
| |
| 作者单位： | 华中科技大学CAD中心,武汉,430074;华中科技大学CAD中心,武汉,430074;华中科技大学CAD中心,武汉,430074;华中科技大学CAD中心,武汉,430074 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| |
| 摘 要： | 根据软件复用的理论思想,针对装配型产品,提出了一种基于构架/构件的新产品开发框架原理,描述了构件/构架的关联关系和组装约束检查等关键技术,提出了一种矩阵方法检验组装结果是否违反约束。根据该框架原理,为某特大型载重车企业开发了一套辅助设计系统(部分模块),并在企业中得到实际应用,取得了较好的效果。
|
| 关 键 词： | 复用 构件 构架 约束 |
| 文章编号： | 1003-8728（2007）01-0131-04 |
| 修稿时间： | 2005-12-22 |
New Product Development Based on Component Reuse Technique |
| |
| Li Bin,Huang Zhengdong,Chen Liping,Zhong Yifang. New Product Development Based on Component Reuse Technique[J]. Mechanical Science and Technology for Aerospace Engineering, 2007, 26(1): 131-134 |
| |
| Authors: | Li Bin Huang Zhengdong Chen Liping Zhong Yifang |
| |
| Affiliation: | CAD Center, Huazhong University of Science and Technology, Wuhan 430074 |
| |
| Abstract: | Following the idea of software reuse and taking a product of assembly type into consideration,the paper put forward the general principles of new product development based on component and architecture reuse and described their key techniques such as component/architecture relevance and assembly constraint check.In addition,it proposed a matrix method to check whether an assembly outcome violates the constraint.Using the principles,it developed a CAD system(part of its module) for a superlarge truck corporation,and the system produces satisfactory application results. |
| |
| Keywords: | reuse component architecture constraint |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
