Study on the failure temperature of Ti/Pt/Au and Pt5Si2-Ti/Pt/Au metallization systems |
| |
Authors: | Jie Zhang Jianqiang Han Yijun Yin Lizhen Dong Wenju Niu |
| |
Affiliation: | The College of Mechanical & Electrical Engineering, China Jiliang University, Hangzhou 310018, China |
| |
Abstract: | The Ti/Pt/Au metallization system has an advantage of resisting KOH or TMAH solution etching.To form a good ohmic contact,the Ti/Pt/Au metallization system must be alloyed at 400 ℃.However,the process temperatures of typical MEMS packaging technologies,such as anodic bonding,glass solder bonding and eutectic bonding,generally exceed 400 ℃.It is puzzling if the Ti/Pt/Au system is destroyed during the subsequent packaging process.In the present work,the resistance of doped polysilicon resistors contacted by the Ti/Pt/Au metallization system that have undergone different temperatures and time are measured.The experimental results show that the ohmic contacts will be destroyed if heated to 500 ℃.But if a 20 nm Pt film is sputtered on heavily doped polysilicon and alloyed at 700 ℃ before sputtering Ti/Pt/Au films,the Pt5Si2-Ti/Pt/Au metallization system has a higher service temperature of 500 ℃,which exceeds process temperatures of most typical MEMS packaging technologies. |
| |
Keywords: | Ti/Pt/Au metallization system packaging ohmic contacts MEMS |
本文献已被 万方数据 等数据库收录! |
| 点击此处可从《半导体学报》浏览原始摘要信息 |
|
点击此处可从《半导体学报》下载全文 |
|