首页 | 本学科首页   官方微博 | 高级检索  
     

耐高温弱凝胶体系的室内研究
引用本文:党娟华,郑峰,杨景辉,宋志东.耐高温弱凝胶体系的室内研究[J].精细石油化工进展,2010,11(10):27-29.
作者姓名:党娟华  郑峰  杨景辉  宋志东
作者单位:[1]胜利油田分公司采油工艺研究院,东营257000 [2]胜利油田分公司胜利采油厂,东营257051
摘    要:以聚合物HPAM为主剂,加入有机酚醛类交联剂和有机复配稳定剂,制备了高温弱凝胶调驱体系。考察了聚合物浓度、交联剂浓度、稳定剂浓度、温度、矿化度及pH对成胶性能的影响。确定了弱凝胶体系的最佳适用条件:聚合物HPAM浓度1200-1800mg/L,交联剂浓度800mg/L;稳定剂浓度80mg/L,体系pH为6~8,在此条件下可耐油藏高温达110℃。弱凝胶体系可实现成胶时间可控,凝胶强度可调。

关 键 词:弱凝胶  耐高温  交联剂  成胶性能

Laboratory Study on Thermostable Weak Gel System
Dang Juanhua,Zheng Feng,Yang Jinghui,Song Zhidong.Laboratory Study on Thermostable Weak Gel System[J].Advances in Fine Petrochemicals,2010,11(10):27-29.
Authors:Dang Juanhua  Zheng Feng  Yang Jinghui  Song Zhidong
Affiliation:Dang Juanhua Zheng Feng Yang Jinghui Song Zhidong( 1. Oil Production Technology Institute of Shengli Oilfield Company, Dongying 257000; 2. Shengli Oil Production Plant of Shengli Oilfield Company; Dongying 257051 )
Abstract:A thermostable weak gel profile modification system was prepared with HPAM, the main component, phenolic aldehyde crosslinker and organic compound stabilizer. The effect of polymer concentration, crosslinker concentration, stabilizer concentration, temperature, salinity and pH on the gelling property was studied. The optimum conditions for preparing the weak gel system were identified as follows: concentration of polymer HPAM 200 to 1 800 mg/L, concentration of crosslinker 800 mg/L, concentration of stabilizer 80 mg/L, pH of the system 6 to 8. The weak gel system can bear the temperature of oil reservoir that is as high as 110 ℃. The gelation time of the weak gel system can be controlled, and the gel strength can be adjusted.
Keywords:weak gel  thermostable  cmsslinker  gelling property
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号