| 四座纯电动巡逻车车架有限元分析 |
| |
| 引用本文： | 李霞,张三川,余红洋. 四座纯电动巡逻车车架有限元分析[J]. 机械设计, 2011, 28(12) |
| |
| 作者姓名： | 李霞 张三川 余红洋 |
| |
| 作者单位： | 郑州大学机械工程学院,河南郑州,450001 |
| |
| 基金项目： | 河南省教育厅自然科学研究计划资助项目(2011B460014); 郑州市科技攻关资助项目(10TTGS483-4) |
| |
| 摘 要： | 采用SolidWorks软件建立车架三维模型,借助于ANSYS软件建立以体单元为基本单元的车架有限元模型.在此模型基础上,进行有限元静力学分析和模态分析,获得车架在弯曲工况和扭转工况下的最大等效应力和应变,以及其前10阶固有频率和振型.结果显示:电动巡逻车车架结构满足材料的强度和刚度要求,但其l阶固有频率和地面的激励频率接近,车架与外激励易产生共振,需采取措施提高车架低阶固有频率.对双主纵梁结构的车架进行模态分析,通过对比改进前后车架的低阶固有频率,为车架优化设计提供了理论指导.
|
| 关 键 词： | 电动巡逻车 车架 有限元分析 静力学分析,模态分析 |
Finite element analysis for four seats electric police patrol automobile frame |
| |
| LI Xia , ZHANG San-chuan , YU Hong-yang. Finite element analysis for four seats electric police patrol automobile frame[J]. Journal of Machine Design, 2011, 28(12) |
| |
| Authors: | LI Xia ZHANG San-chuan YU Hong-yang |
| |
| Affiliation: | LI Xia,ZHANG San-chuan,YU Hong-yang(School of Mechanical Engineering,Zhengzhou University,Zhengzhou 450001,China) |
| |
| Abstract: | The three-dimensional model was made by applying SolidWorks.With the ANSYS software,the finite element analysis(FEA) model of the frame that takes the solid elements as the basic elements was established.Based on this model,FEA static stress analysis and modal analysis is preceded.The bending and torsion conditions of the frame were simulated,and the maximum stress and displacement of the frame were obtained.The top ten bands of natural frequencies and vibration modes were obtained.It is shown that this mod... |
| |
| Keywords: | electric police patrol automobile frame finite element analysis static stress analysis modal analysis |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
