| 基于有限单元法的方形固支平膜片优化设计 |
| |
| 引用本文： | 黄站立,崔琪.基于有限单元法的方形固支平膜片优化设计[J].机电工程技术,2011,40(10):28-31. |
| |
| 作者姓名： | 黄站立 崔琪 |
| |
| 作者单位： | 漯河职业技术学院,河南漯河,462002 |
| |
| 摘 要： | 针对方形平膜片在传统设计中存在的计算繁琐、效率低下和精度不高等缺陷,应用大型有限元分析软件ANSYS12.0建立了方形平膜片有限元模型,研究了主要结构参数和载荷对弹性特性的影响规律.同时对方形平膜片的优化设计参数进行了分析,并利用软件ANSYS 12.0的优化设计模块对方形平膜片的主要参数进行了优化设计,分析表明优化后...
|
| 关 键 词： | 方形平膜片 有限单元法 优化设计 |
Optimization Design of the Quadrate Fixed Supported Flat Diaphragm Based on the Finite Element Method |
| |
| HUANG Zhan-li,CUI Qi.Optimization Design of the Quadrate Fixed Supported Flat Diaphragm Based on the Finite Element Method[J].Mechanical & Electrical Engineering Technology,2011,40(10):28-31. |
| |
| Authors: | HUANG Zhan-li CUI Qi |
| |
| Affiliation: | HUANG Zhan-li,CUI Qi(Luohe Vocational & Tech College,Luohe 462002,China) |
| |
| Abstract: | As to the defects that exist in the traditional design of square flat diaphragm,such as complicated calculation,low efficiency,low accuracy and so on,ANSYS is used to establish the finite element model of square flat diaphragm and the method about its elastic characteristics analysis and optimization design is proposed.In the method,the elastic characteristics of a square flat diaphragm with clamped boundary and the distribution of stress and displacement of elastomer are simulated and analyzed by ANSYS.The... |
| |
| Keywords: | square flat diaphragm finite element method optimization design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
