| 基于CAB分析的铰链式塑料瓶盖注射模设计 |
| |
| 引用本文： | 朱计 张增 张杰 类彦威. 基于CAB分析的铰链式塑料瓶盖注射模设计[J]. 模具工业, 2008, 34(1): 44-47 |
| |
| 作者姓名： | 朱计 张增 张杰 类彦威 |
| |
| 作者单位： | 四川大学高分子科学与工程学院,四川成都610065 |
| |
| 摘 要： | 分析了铰链式塑料瓶盖的结构特点，使用Moldflow软件对塑件注射成型过程进行了CAE分析．确定了模具的浇注系统及成型工艺。模具采用点浇口、自动脱螺纹结构，模具结构设计合理，生产效率高。
|
| 关 键 词： | 瓶盖 铰链式 脱螺纹 注射模 |
| 文章编号： | 1001-2168（2008）01-0044-04 |
| 收稿时间： | 2007-09-03 |
| 修稿时间： | 2007-09-03 |
Design of injection mould for plastic articulated type bottle cap based on CAE analysis |
| |
| ZHU Ji, ZHANG Zeng, ZHANG Jie, LEI Yan-wei. Design of injection mould for plastic articulated type bottle cap based on CAE analysis[J]. Die & Mould Industry, 2008, 34(1): 44-47 |
| |
| Authors: | ZHU Ji ZHANG Zeng ZHANG Jie LEI Yan-wei |
| |
| Abstract: | The structural feature of a plastic articulated type bottle cap was analyzed. Software Moldflow was used to make a CAE-based analysis of the injection molding process of the component, in which the feeding system and technological conditions for the forming were determined. The mould applies pin-point gate and automatic stripping structure of screw thread. |
| |
| Keywords: | bottle cap articulated type stripping of screw thread injection mould |
| 本文献已被 维普 等数据库收录！ |
