| PBX切屑的细观特征及形成机理研究 |
| |
| 引用本文： | 唐维,李明,闫斌,赵永忠,张丘,刘维,赵小东. PBX切屑的细观特征及形成机理研究[J]. 含能材料, 2009, 17(3): 307-311. DOI: 10.3969/j.issn.1006-9941.2009.03.014 |
| |
| 作者姓名： | 唐维 李明 闫斌 赵永忠 张丘 刘维 赵小东 |
| |
| 作者单位： | 中国工程物理研究院化工材料研究所,四川,绵阳,621900 |
| |
| 基金项目： | 中国工程物理研究院化工材料研究所所长基金资助项目 |
| |
| 摘 要： | 采用激光粒度仪测试高聚物粘结炸药(PBX)切屑的粒径,表明相同工艺参数下加切削液的切屑平均粒径大于干车削的,同时粒径随进给量增大而增大,随机床主轴转数提高而减小,未体现出与车削深度相关的明显关系.利用SEM观测发现PBX切屑主要有针状、块状和鳞片状三种细观形态,切屑的形成体现为裂纹的成核扩展导致的宏观断裂,并主要表现为炸药颗粒的穿晶断裂.使用工业CT探测试样亚表面表明裂纹的扩展路径和刀具工件相对运动状态以及工件结构边界条件有关,方向指向较为薄弱的工件表面.建立的切屑形成过程唯象模型有助于理解切屑的形成机理.
|
| 关 键 词： | 材料科学 高聚物粘结炸药(PBX) 切屑 裂纹 细观特征 切屑形成机理 |
| 收稿时间： | 2008-06-19 |
| 修稿时间： | 2008-09-23 |
Microstructure and Formation Mechanism of PBX Chips |
| |
| TANG Wei,LI Ming,YAN Bin,ZHAO Yong-zhong,ZHANG Qiu,LIU Wei and ZHAO Xiao-dong. Microstructure and Formation Mechanism of PBX Chips[J]. Chinese Journal of Energetic Materials, 2009, 17(3): 307-311. DOI: 10.3969/j.issn.1006-9941.2009.03.014 |
| |
| Authors: | TANG Wei LI Ming YAN Bin ZHAO Yong-zhong ZHANG Qiu LIU Wei ZHAO Xiao-dong |
| |
| Affiliation: | Institute of Chemical Materials;CAEP;Mianyang 621900;China |
| |
| Abstract: | Studying on microstructure of PBX chips and its formation mechanism is helpful to understand the forming process of machined surface.It's of a great significance to guarantee and improve machining surface quality.The laser particle size analyzer was employed to detect PBX chips samples.It shows that the average size of chips which prepared by turning with cutting fluid is larger than that prepared by dry turning,the size increases with feed and decreases with the elevation of machine spindle revolutions,and... |
| |
| Keywords: | materials science polymer bonded explosive(PBX) chip crack microstructure chip formation mechanism |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《含能材料》浏览原始摘要信息 |
|
点击此处可从《含能材料》下载全文 |
|
