| 汽车空调压缩机驱动盘冷挤压的 Deform 模拟 |
| |
| 引用本文： | 乔硕,石文超,王炯,薛克敏.汽车空调压缩机驱动盘冷挤压的 Deform 模拟[J].精密成形工程,2013,5(3):65-68. |
| |
| 作者姓名： | 乔硕 石文超 王炯 薛克敏 |
| |
| 作者单位： | 合肥工业大学材料科学与工程学院 |
| |
| 摘 要： | 采用冷挤压工艺成形汽车空调压缩机驱动盘。用Deform-3D软件对冷挤压过程进行数值模拟,分析了冷挤压成形过程金属流动、等效应变和速度分布等规律。结果表明,用冷挤压工艺成形驱动盘,成形载荷小,充填效果好,材料利用率较高。
|
| 关 键 词： | 汽车空调 压缩机 驱动盘 冷挤压 数值模拟 |
| 收稿时间： | 2012/9/10 0:00:00 |
| 修稿时间： | 4/1/2013 12:00:00 AM |
The Deform Simulation on Cold Extrusion Process of Compressor Driving Plate of Conditioner in Automobile |
| |
| QIAO Shuo,SHI Wen-chao,WANG Jiong and XUE Ke-min.The Deform Simulation on Cold Extrusion Process of Compressor Driving Plate of Conditioner in Automobile[J].Journal of Netshape Forming Engineering,2013,5(3):65-68. |
| |
| Authors: | QIAO Shuo SHI Wen-chao WANG Jiong and XUE Ke-min |
| |
| Affiliation: | QIAO Shuo;SHI Wen-chao;WANG Jiong;XUE Ke-min;School of Materials Science and Engineering,Hefei University of Technology; |
| |
| Abstract: | The compressor driving plate of automobile conditioner is formed by cold extrusion technology. The cold extrusion process was simulated by Deform-3D. And the metal flow, effective stain and rate distribution in cold extrusion were investigated. The result shows that the cold extrusion process is beneficial for the filling condition with a relative low forming load. The material utilization rate is relatively high. |
| |
| Keywords: | automobile conditioner compressor driving plate cold extrusion numerical simulation |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《精密成形工程》浏览原始摘要信息 |
|
点击此处可从《精密成形工程》下载全文 |
