| 聚氨酯海绵表面改性对Ti2AlN多孔陶瓷挂浆量的影响 |
| |
| 引用本文： | 王刚,何雄,杨熠,尚珊珊,严明.聚氨酯海绵表面改性对Ti2AlN多孔陶瓷挂浆量的影响[J].现代技术陶瓷,2015,36(3):1-4. |
| |
| 作者姓名： | 王刚 何雄 杨熠 尚珊珊 严明 |
| |
| 作者单位： | 湖北工业大学;武汉生物工程学院;武汉理工大学 |
| |
| 基金项目： | 国家自然科学基金项目（50302073）；湖北省教育厅科研项目计划（Q20121407） |
| |
| 摘 要： | 利用有机泡沫浸渍法制备Ti2AlN多孔陶瓷,研究了聚氨酯海绵表面改性对陶瓷挂浆量的影响。通过对不同浓度的NaOH预处理后的海绵增重、坯体堵孔率分析表明,浓度为15%的NaOH对聚氨酯海绵的挂浆量最好;扫描电镜研究发现,聚氨酯海绵用15%NaOH溶液浸泡4h之后,再用羧甲基纤维素(CMC)预处理24h,海绵挂浆效果最佳。
|
| 关 键 词： | 聚氨酯海绵 多孔陶瓷 有机泡沫浸渍法 Ti2AlN表面改性 |
Effects on Ti2AlN Porous Ceramic Hanging Pulp Amount of Polyurethane Sponge Surface Modification |
| |
| Wang Gang,He Xiong,Yang Yi,Shang Shanshan and Yan Ming.Effects on Ti2AlN Porous Ceramic Hanging Pulp Amount of Polyurethane Sponge Surface Modification[J].Advanced Ceramics,2015,36(3):1-4. |
| |
| Authors: | Wang Gang He Xiong Yang Yi Shang Shanshan and Yan Ming |
| |
| Affiliation: | Hubei University of Technology, Wuhan 430068;Wuhan Institute of Bioengineering, Wuhan 430415,Hubei University of Technology, Wuhan 430068;Wuhan University of Technology, Wuhan 430070,Hubei University of Technology, Wuhan 430068,Hubei University of Technology, Wuhan 430068 and Hubei University of Technology, Wuhan 430068 |
| |
| Abstract: | Ti2AlN porous ceramics had been prepared by using organic foam impregnation process, and studied the polyurethane sponge surface modification affecting the quantities of hanging ceramic slurry. After pretreatment by different concentrations of NaOH sponge weight gain, body blocking rate analysis showed the best of the concentration of 15% NaOH to polyurethane sponge hang pulp quantities. Scanning electron microscopy (SEM), the study found the polyurethane sponge soaked with 15% NaOH solution after 4 hours, then used carboxymethyl cellulose (CMC) pretreatment for 24 hours, sponge hang pulp effect was the best. |
| |
| Keywords: | Polymeric sponge porous ceramics Organic foam impregnation process Ti2AlN surface modification |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《现代技术陶瓷》浏览原始摘要信息 |
|
点击此处可从《现代技术陶瓷》下载全文 |
|
