Wear behavior of Ni–P and Ni–P–Al2O3 electroless coatings

In this research, hardness and wear resistance of two types of electroless coating have been investigated including Ni–P and Ni–P–Al₂O₃ coatings. These coatings were applied on AISI 1045 steel discs by electroless deposition process and then they were heat treated at 200, 400 and 600 °C for 1 h. Wear resistance of deposits was measured by the pin on disc method and wear surfaces and debris were studied by scanning electron microscopy (SEM). Also, microstructural changes were evaluated by X-ray diffraction (XRD) analysis.The results showed that the existence of alumina particles in Ni–P coating matrix led to an increase in the hardness and wear resistance of the deposits. It was also found that heat treated coatings at about 400 °C have the maximum hardness and wear resistance.