1. Laboratoire des Matériaux Organiques, Faculté de la Technologie, Département de Génie des Procédés, Université Abderrahmane Mira, Bejaia 06000, Algeria;2. Institute of Chemistry and Technology of Polymers (ICTP) – CNR, Via Campi Flegrei 34, 80078 Pozzuoli (NA), Italy
Abstract:
The chemical modification by melt‐mixing of an EBAGMA terpolymer with LDPE and PET was investigated with the aim to use these EBAGMA/LDPE and EBAGMA/PET blends (in equal weight quantities) as compatibilizer master batches to improve the compatibility of the LDPE/PET system. It is shown that when the EBAGMA terpolymer is melt blended with LDPE, almost 40% of the initial amount of EBAGMA is linked to the LDPE backbone. In contrast, in the case of EBAGMA/PET, FT‐IR spectra indicate the total reactivity between the two components through the reaction of the epoxy group of EBAGMA with the PET terminal groups. SEM analysis shows that both master batches present two well‐interconnected phases.
