| 单晶叶片用硅基陶瓷型芯制备与性能研究 |
| |
| 引用本文： | 张玲,刘建平,孙革,杜洪强.单晶叶片用硅基陶瓷型芯制备与性能研究[J].铸造,2012,61(8):941-943. |
| |
| 作者姓名： | 张玲 刘建平 孙革 杜洪强 |
| |
| 作者单位： | 1. 中航工业沈阳黎明航空发动机(集团)有限责任公司,辽宁沈阳,110043
2. 空军驻沈阳黎明公司军代表室,辽宁沈阳,110043 |
| |
| 摘 要： | 以石英玻璃粉为基体材料制备了单晶叶片用硅基陶瓷型芯,研究了陶瓷型芯的抗弯强度、热变形、收缩率,采用扫描电镜对试样微观结构进行了表征。结果表明:经1190℃焙烧,型芯的烧成收缩率为0.59%,高温强度可达29.07 MPa,热变形量为0.10 mm。
|
| 关 键 词： | 硅基陶瓷型芯 抗弯强度 热变形 收缩率 |
Preparation and Properties of Silica-Based Ceramic Core for Single Crystal Blades |
| |
| ZHANG Ling
,
LIU Jian-ping
,
SUN Ge
,
DU Hong-qiang.Preparation and Properties of Silica-Based Ceramic Core for Single Crystal Blades[J].Foundry,2012,61(8):941-943. |
| |
| Authors: | ZHANG Ling LIU Jian-ping SUN Ge DU Hong-qiang |
| |
| Affiliation: | 1(1.AVIC Shenyang Liming Aero-Engine(Group) Corporation Ltd.,Shenyang 110043,Liaoning,China;2.Representative Office of Air Force in AVIC Shenyang Liming Aero-Engine(Group) Corporation Ltd.,Shenyang 110043,Liaoning,China) |
| |
| Abstract: | The ceramic cores for the single crystal blades were manufactured with quartz glass as matrix materials.The bending strength,thermal deformation and shrinkage rate of the core specimens were measured.The results show that the shrinkage rate of the core after sintered at 1 190 ℃ is 0.59%,the bending strength is 29.07 MPa,and the thermal deformation is 0.10 mm. |
| |
| Keywords: | silica-based ceramic core bending strength thermal deformation shrinkage rate |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
