| 2．4Gb／s跨阻型光前置放大器CAD及验证 |
| |
| 作者单位： | The 13th Institute，Ministry of EI，Shijiazhuang，050051 |
| |
| 摘 要： | 阐述了光纤通信前置放大器的设计原理，分析了光接收机中ＰＩＮ二极管和ＧａＡｓＦＥＴ器件的信号模型和噪声模型，提取了放大器用ＧａＡｓＦＥＴ器件的模型参数（包括大信号、小信号和噪声模型参数）。利用ＰＳＰＩＣＥ程序对光前置放大器进行了模拟分析和优化设计，并实际制作了用于２．４Ｇｂ／ｓ光纤通信的ＰＩＮ－ＨＥＭＴ前置放大器。实测结果表明放大器３ｄＢ带宽达到ＤＣ～４．４ＧＨｚ，增益为１８±１ｄＢ；加入ＰＩＮ二极管后的光接收模块的３ｄＢ带宽为ＤＣ～１．６８８ＧＨｚ，满足了２．４Ｇｂ／ｓ光纤通信的需要。
|
| 关 键 词： | 光纤通信前置放大器 |
2.4Gb/s Transimpedance Optical Preamplifier CAD and Verification |
| |
| Gao Jianjun,Liang Chunguang,Chai Guangyao,Yuan Mingwen. 2.4Gb/s Transimpedance Optical Preamplifier CAD and Verification[J]. Micronanoelectronic Technology, 1994, 0(4) |
| |
| Authors: | Gao Jianjun Liang Chunguang Chai Guangyao Yuan Mingwen |
| |
| Abstract: | This paper describes the deslgn of the transimpedance preamplifier in optical fiber communication. The signal and noise models of PIN diode and GaAs MESFET in the optical receiver are analyzed. The parameters(including large signal pararneter,small signal and noise parameters)of the GaAs FET de-vices in the preamplifier are extracted. In addition, the simulation analvsis and optimized design for the PIN-HEMT preamplifier is conducted by using PSPICE program and the preamplifier for2.4Gb/s optical fiber communication is fabricated. The preamplifier exhibits a gain of 18±1dB over 3dB bandwidth of DC～4.4GHz. With a PIN diode added,it shows DC～1.688GHz over 3dB bandwidth,which meets the demand of 2.4Gb/s optical fiber communication. |
| |
| Keywords: | Optical communication preamplifier |
| 本文献已被 CNKI 等数据库收录！ |
