首页 | 本学科首页   官方微博 | 高级检索  
     

特大型负游隙四点接触球轴承拟静力学分析
引用本文:徐绍仁,杨友中,白宇光,王燕霜,邓四二. 特大型负游隙四点接触球轴承拟静力学分析[J]. 轴承, 2009, 0(9)
作者姓名:徐绍仁  杨友中  白宇光  王燕霜  邓四二
作者单位:1. 洛阳LYC轴承有限公司,技术中心,河南,洛阳,471039
2. 中机十院国际工程有限公司,河南,洛阳,471003
3. 河南科技大学,机电工程学院,河南,洛阳,471003
基金项目:特大型四点接触球轴承摩擦力矩控制技术研究 
摘    要:给出了特大型负游隙四点接触球轴承拟静力学分析的方法,并以某型号转盘轴承为例计算空载时不同负游隙下球与内、外圈之间的法向接触载荷,结果表明:轴承四个接触点处的接触载荷随负游隙绝对值的增大而增大,负游隙的微小变化对接触力的影响很大,可以通过使负游隙绝对值略微增大来提高轴承的启动摩擦力矩.

关 键 词:四点接触球轴承  负游隙  拟静力学分析

Quasi-static Analysis on Large-size Four Point Contact BallBearings with Negative Axial Internal Clearance
XU Shao-ren,YANG You-zhong,BAI Yu-guang,WANG Yan-shuang,DENG Si-er. Quasi-static Analysis on Large-size Four Point Contact BallBearings with Negative Axial Internal Clearance[J]. Bearing, 2009, 0(9)
Authors:XU Shao-ren  YANG You-zhong  BAI Yu-guang  WANG Yan-shuang  DENG Si-er
Affiliation:XU Shao-ren1,YANG You-zhong1,BAI Yu-guang2,WANG Yan-shuang3,DENG Si-er3(1.Technology Center,Luoyang LYC Bearing Co.,Ltd.,Luoyang 471039,China,2.China Machinery TDI International Engineering Co.,Luoyang 471003,3.Henan University of Science , Technology,China)
Abstract:Quasi-static analysis is performed on large-size four point contact ball bearings with negative axial internal clearance.Taking a slewing bearing as example,the normal contact loads between balls and inner/outer ring are computed with different negative axial internal clearance under zero applied load.The results show that the normal loads increase as the absolute value of negative axial internal clearance increases.The slight change of negative axial internal clearance has significant effect on normal cont...
Keywords:four point contact ball bearing  negative internal clearance  quasi-static analysis  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号