Improved dehydrogenation of MgH2-Li3AlH6 mixture with TiF3 addition

MgH₂-Li₃AlH₆ mixture shows a mutual activation effect between the components. But the dehydrogenation kinetics is still slow, especially at temperature as low as 250 °C. Hereby, an additive (TiF₃) was introduced into the mixture in the present study. The reaction mechanisms were studied by the combined analyses of X-ray diffraction (XRD), thermogravimetric analysis (TGA), as well as thermodynamic calculations. A two-step ball milling method could reduce the mechanical decomposition of Li₃AlH₆ effectively and was adopted. During milling, Li₃AlH₆ reacts with TiF₃ and produces Al₃Ti while MgH₂ remains stable. All the species are well mixed after milling and the grain size is as small as 100 nm. During TGA test, all the reactions occur at lower temperatures compared with undoped mixture, especially the dehydrogenation of MgH₂, which shows a decrease of 60 °C. Its activation energy is reduced by 32.0 kJ mol⁻¹. The first three isothermal (250 °C) cycles indicate that the kinetics of dehydrogenation has been greatly enhanced, showing a reversible capacity of 4.5 wt.% H₂. The time needed for the 1st dehydrogenation has been shortened to 3600 s from 8000 s for the undoped mixture. These improvements are mainly attributed to the catalytic effect of the in-situ formed Al₃Ti. But there is no influence on the rehydrogenation kinetics and the enthalpy of the dehydrogenation of MgH₂ is unchanged.