首页 | 本学科首页   官方微博 | 高级检索  
     

地铁隧道衬砌管片承载力试验及计算方法
引用本文:周海鹰,李立新,陈廷国. 地铁隧道衬砌管片承载力试验及计算方法[J]. 山东大学学报(工学版), 2010, 40(4): 84-87
作者姓名:周海鹰  李立新  陈廷国
作者单位:1. 大连理工大学建设工程学部, 辽宁 大连 116024; 2. 沈阳建筑大学土木工程学院, 辽宁 沈阳 110168
基金项目:沈阳市科技局、财政局资助项目 
摘    要:对3片1∶1衬砌管片进行了承载力试验,分析了试验加载方式和配筋率对钢筋混凝土衬砌管片破坏机理、极限荷载的影响。试验结果表明,轴力作用可以有效提高衬砌管片的开裂荷载、屈服荷载和极限荷载;衬砌管片屈服荷载和极限荷载随配筋率的提高而提高,但提高幅度不大,而配筋率的提高对开裂荷载基本无影响。根据衬砌管片偏心受压破坏模式,给出了衬砌管片偏心受压承载力实用计算公式。

关 键 词:盾构隧道  衬砌管片  承载力  
收稿时间:2010-02-25

Experiments and calculation method for bearing capacity of the lining segment of metro shield tunneling
ZHOU Hai-ying,LI Li-xin,CHEN Ting-guo. Experiments and calculation method for bearing capacity of the lining segment of metro shield tunneling[J]. Journal of Shandong University of Technology, 2010, 40(4): 84-87
Authors:ZHOU Hai-ying  LI Li-xin  CHEN Ting-guo
Affiliation:1. Faculty of Infrastructure Engineering, Dalian University of Technology, Dalian 116024, China;2. School of Civil Engineering, Shenyang Jianzhu University, Shenyang 110168, China
Abstract: A test of three reinforced concrete (RC) lining segments of full scale was carried out. The effect of the loading method and reinforcement ratio on the failure mechanism and ultimate bearing capacity of the RC lining segments was analyzed based on the test results. Test results indicated that the cracking load, the yielding load and the ultimate load obviously increases because of the  axial force effect. The yielding load and the ultimate load slightly increase with an increase of the reinforcement ratio, but the cracking load was hardly affected by the reinforcement ratio. Based on the analysis of the failure mode of lining segment, formulas for the bearing capacity of the lining segment to eccentric compression are proposed.
Keywords: shield tunneling  lining segment  bearing capacity
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《山东大学学报(工学版)》浏览原始摘要信息
点击此处可从《山东大学学报(工学版)》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号