首页 | 本学科首页   官方微博 | 高级检索  
     

JH电瓷专用水泥在1100kV棒形产品生产上的应用
引用本文:李红宝,袁枫,陈端峰. JH电瓷专用水泥在1100kV棒形产品生产上的应用[J]. 电瓷避雷器, 2008, 0(4)
作者姓名:李红宝  袁枫  陈端峰
作者单位:西安双佳高压电瓷电器有限公司,西安710077
摘    要:对JH电瓷专用水泥胶合剂和普通硅酸盐水泥胶合剂进行了性能对比试验,结果表明:该水泥胶合剂强度比较高,达123.0 MPa,凝结时间缩短一半。使用JH电瓷专用水泥胶合剂胶装的百万伏棒形产品,其温度循环试验、弯曲破坏试验、扭转负荷试验均能达到技术要求。最后,提出了该水泥胶合剂在应用过程中应注意的几个关键问题。

关 键 词:JH电瓷专用水泥胶合剂  胶合剂强度  凝结时间

Application of JH Cement Adhesive in 1100 kV Rod Insulator Production
LI Hong-bao,YUAN feng,CHEN Duan-feng. Application of JH Cement Adhesive in 1100 kV Rod Insulator Production[J]. Insulators and Surge Arresters, 2008, 0(4)
Authors:LI Hong-bao  YUAN feng  CHEN Duan-feng
Abstract:Comparative tests of JH special cement for insulator were performed together with normal portland cement. The result shows that the cement has higher strength reaching 123.0 MPa and shorter setting time by two times. The 1 MV post insulator cemented with this cement passed all technical requirement at temperature cycle test, bending failing load test, and torsion load test. At the same time, some key aspects are put forwards in application of the cement.
Keywords:JH special cement for insulator  cement strength  setting time
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号