| 基于UG的链传动二次开发模块 |
| |
| 引用本文： | 孟庆尧,张静.基于UG的链传动二次开发模块[J].机械工程师,2006(12):81-83. |
| |
| 作者姓名： | 孟庆尧 张静 |
| |
| 作者单位： | 沈阳化工学院,机械工程学院,沈阳,110142 |
| |
| 摘 要： | 分析了链传动建模的难点,以UG软件为平台开发了链传动整体建模模块。实现了链传动三维设计,解决了销轴模拟定位及链传动的模拟装配,从而获得实际中心矩、实际链节数、小链轮实际包角等实用数据。
|
| 关 键 词： | 链传动 建模 装配 |
| 文章编号： | 1002-2333(2006)12-0081-03 |
| 收稿时间： | 2006-07-18 |
| 修稿时间： | 2006年7月18日 |
Research on 3D-design System of Roller Chain Based on Unigraphics |
| |
| MENG Qing-yao,ZHANG Jing.Research on 3D-design System of Roller Chain Based on Unigraphics[J].Mechanical Engineer,2006(12):81-83. |
| |
| Authors: | MENG Qing-yao ZHANG Jing |
| |
| Affiliation: | Shenyang Institude of Chemical Technology, Shenyang 110142, China |
| |
| Abstract: | In this paper , UG/OPEN are utilized to create general programs for solve the modeling and assemblies of roller chain. The programs can fix every pin and obtain a simulated orbit of roller chain. It realizes the 3D design of roll chain wheel and the equipment of roller chain drive. Besides we gain the actual distance of center and other practical data. |
| |
| Keywords: | UG/OPEN |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
