| 自动挤牛奶器爪形罩注射模具设计 |
| |
| 引用本文： | 郑新建 孙先明 单忠德 胡凡建 胡阳艳. 自动挤牛奶器爪形罩注射模具设计[J]. 武汉化工学院学报, 2005, 27(4): 76-77,80 |
| |
| 作者姓名： | 郑新建 孙先明 单忠德 胡凡建 胡阳艳 |
| |
| 作者单位： | [1]湖北工业大学机械工程学院,湖北武汉430068 [2]武汉化工学院材料科学与工程学院,湖北武汉430074 [3]机械科学研究院,北京100044 |
| |
| 基金项目： | 国家自然科学基金资助项目（50305009） |
| |
| 摘 要： | 介绍了爪形罩的成形工艺及注射模结构，为解决塑件的内外两侧抽芯，外侧采用斜导柱抽芯，内抽芯采用分体型芯，四个爪孔型芯采用出模后专用工具抽芯，提高了塑件的注塑生产效率．
|
| 关 键 词： | 爪形罩 注射模 内抽芯 |
| 文章编号： | 1004-4736（2005）04-0076-02 |
| 收稿时间： | 2005-05-13 |
| 修稿时间： | 2005-05-13 |
Design of the injection mould for the special -shaped claw cover of a automatic breast pump and milking machine |
| |
| Zheng XinJian;Sun XianMing;Chan ZhongDe;Hu FanJian;Hu YangYan. Design of the injection mould for the special -shaped claw cover of a automatic breast pump and milking machine[J]. Journal of Wuhan Institute of Chemical Technology, 2005, 27(4): 76-77,80 |
| |
| Authors: | Zheng XinJian Sun XianMing Chan ZhongDe Hu FanJian Hu YangYan |
| |
| Abstract: | The technological process for forming the claw -shaped cover and the structure of the injection mould are introduced. The structure with a double- slanted slide was used for the mould to realize automatic inner -pulling and reposition. The cores for forming claws were taken out artificially. The production efficiency of the claw -shaped cover has been increased. |
| |
| Keywords: | claw -shaped cover injection mould inner core pulling |
| 本文献已被 CNKI 维普 等数据库收录！ |
