Three-dimensional power system stabilizer |
| |
Authors: | Damir Sumina Neven Buli?Igor Erceg |
| |
Affiliation: | University of Zagreb, Faculty of Electrical Engineering and Computing, Electric Machines, Drives and Automation, Unska 3, 10000 Zagreb, Croatia |
| |
Abstract: | Power system stabilizers (PSSs) are used to enhance damping of power system oscillations through excitation control of synchronous generator. The objective of the PSS is to generate a stabilizing signal, which produces a damping torque component on the generator shaft. Conventional PSSs are designed with the phase compensation technique in the frequency domain and include the lead-lag blocks whose parameters are determined according to a linearized power system model. The performance of conventional PSSs (CPSSs) depends upon the generator operating point and the system parameters, but a reasonable level of robustness can be achieved depending on the tuning method. This paper presents a new three-dimensional PSS (3D PSS), which uses rotor speed deviation, rotor acceleration and load angle deviation as input signals. The 3D PSS attempts to return the generator to the state-space origin, based on the generator’s trajectory in state-space and the achievement of torque equilibrium. The 3D PSS is robust to system parameters changes. The proposed algorithm was implemented in a digital control system, tested in a laboratory environment on a synchronous generator connected to the power system, and then compared with CPSS. Experimental results show that the proposed PSS achieves better performance than the CPSS in damping oscillations. |
| |
Keywords: | Power system stabilizer Synchronous generator Excitation control |
本文献已被 ScienceDirect 等数据库收录! |
|