首页 | 本学科首页   官方微博 | 高级检索  
     

微型可控震源的动态特性分析
引用本文:张,锐,等.微型可控震源的动态特性分析[J].物探装备,2014(2):91-95.
作者姓名:  
作者单位:[1]中石化地球物理公司河南分公司,河南南阳473132 [2]西安交通大学机械结构强度与振动国家重点实验室,河南南阳473132
摘    要:可控震源产生信号的可控性以及其安全环保、成本低的优点使其被广泛应用于地震勘探中。微型可控震源以其轻便,更易于适应复杂地形的优点而得到越来越多的重视。震源与大地之间的耦合通常会导致震源的输出力信号出现谐波失真。本文采用有限单元法,对一个微型可控震源设计模型进行了模态分析与瞬态响应分析,得到了其在100~200Hz范围内正弦载荷激励下的系统响应,并进行了谐波失真分析。

关 键 词:可控震源  模态  耦合  谐波失真

Analysis of dynamic characteristics of micro-vibroseis
Abstract:As the signal generated by vibroseis is controllable as well as its safety, environmental friendly and low cost, the vibroseis is widely used for seismic exploration. Due to its portability, the micro-vibroseis is more adaptable to complex terrain and it is used increasingly. The coupling between the vibroseis and the earth changes will lead to signal harmonic distortion. In this paper, modal analysis and transient response analysis under sinusoidal excitation load for a designed micro-vibroseis model are conducted within 100--200 Hz frequency range. The harmonic distortion analysis results are obtained finally, which demonstrates the designed micro-vibroseis structure meets the requirements of reducing the harmonic distortion.
Keywords:vibroseis  model  coupling  harmonic-distortion
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号