| 大型电机主轴内孔加工的镗杆设计及ANSYS静态分析 |
| |
| 引用本文： | 陈刚,李再华. 大型电机主轴内孔加工的镗杆设计及ANSYS静态分析[J]. 机械工程师, 2007, 0(10): 87-89 |
| |
| 作者姓名： | 陈刚 李再华 |
| |
| 作者单位： | 1. 株洲职业技术学院,湖南,株洲,412000
2. 湘潭电机集团,湖南,湘潭,411100 |
| |
| 摘 要： | 主轴内孔加工技术的研究是大型电机研制的重要环节.文中首先根据项目要求提出了四种镗杆的设计方案并加以分析.然后根据四种方案进行了相应的有限元静态分析,分析结果表明方案四由于形成框架结构,且在镗杆尾部插有硬质合金棒,其刚性提高,静变形最小.
|
| 关 键 词： | 镗杆设计 有限元 ANSYS 静态分析 电机主轴 内孔加工 杆设计 ANSYS 有限元静态分析 Static Analysis Based Hole Spindle Motor Large Machining 最小 静变形 刚性 合金棒 尾部 框架结构 结果 的设计方案 |
| 文章编号： | 1002-2333（2007）10-0087-03 |
| 修稿时间： | 2007-08-05 |
Design of Boring Bar for Machining Large Motor Spindle Hole Based on ANSYS Static Analysis |
| |
| CHEN Gang,LI Zai-hua. Design of Boring Bar for Machining Large Motor Spindle Hole Based on ANSYS Static Analysis[J]. Mechanical Engineer, 2007, 0(10): 87-89 |
| |
| Authors: | CHEN Gang LI Zai-hua |
| |
| Affiliation: | 1.Zhuzhou Professional Technology College,Zhuzhou 412000, China; 2.Hunan General Electric Group,Xiangtan 411000, China |
| |
| Abstract: | Spindle Hole processing technology is an important link in large motor development. Firstly, four boring bar design and analysis were put forward in this paper requested under the project. Then, static analysis of boring bar was done based on the four programs. The results show the fourth program has better rigidity and the smallest static deformation due to the formation frame structure and cemented carbide rods inserted in the tail of boring bar. |
| |
| Keywords: | boring bar design finite element ANSYS static analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
