| 复合添加Zr、Cr和Pr对Al-Zn-Mg-Cu合金组织和性能的影响 |
| |
| 引用本文： | 陈康华,方华婵,陈祥. 复合添加Zr、Cr和Pr对Al-Zn-Mg-Cu合金组织和性能的影响[J]. 中国有色金属学报, 2010, 20(2) |
| |
| 作者姓名： | 陈康华 方华婵 陈祥 |
| |
| 作者单位： | 中南大学,粉末冶金研究院,长沙,410083 |
| |
| 基金项目： | 国家重点基础研究发展计划资助项目，国家自然科学基金委员会创新研究群体科学基金资助项目，国家自然科学基金资助项目 |
| |
| 摘 要： | 采用铸锭冶金法制备Al-Zn-Mg-Cu-Zr、Al-Zn-Mg-Cu-Cr-Pr和Al-Zn-Mg-Cu-Zr-Cr-Pr3种合金,通过金相显微、扫描电镜和透射电镜观察以及拉伸性能、极化曲线、应力腐蚀和剥落性能的测试,研究复合添加Zr、Cr和Pr对Al-Zn-Mg-Cu合金组织和性能的影响。结果表明:复合添加Zr、Cr和Pr可有效抑制Al-Zn-Mg-Cu合金回复过程中亚晶的合并和长大,显著抑制再结晶,提高合金抗应力腐蚀和抗剥落腐蚀的性能;与单独添加Zr的合金相比,复合添加Zr、Cr和Pr的合金断裂韧性KⅠC从23.3MPa·m1/2提高到29.3MPa·m1/2,合金应力腐蚀开裂界限应力强度因子KⅠSCC由10.9MPa·m1/2提高到24.5MPa·m1/2,合金的抗拉强度、屈服强度及伸长率都略有提高。
|
| 关 键 词： | Al-Zn-Mg-Cu合金 微观组织 力学性能 腐蚀性能 |
Effects of Zr, Cr and Pr additions on microstructure and properties of Al-Zn-Mg-Cu alloys |
| |
| CHEN Kang-hua,FANG Hua-chan,CHEN Xiang. Effects of Zr, Cr and Pr additions on microstructure and properties of Al-Zn-Mg-Cu alloys[J]. The Chinese Journal of Nonferrous Metals, 2010, 20(2) |
| |
| Authors: | CHEN Kang-hua FANG Hua-chan CHEN Xiang |
| |
| Affiliation: | CHEN Kang-hua,FANG Hua-chan,CHEN Xiang (Institute of Powder Metallurgy,Central South University,Changsha 410083,China) |
| |
| Abstract: | Three kinds of alloys Al-Zr-Mg-Cu-Zr, Al-Zn-Mg-Cu-Cr-Pr and Al-Zn-Mg-Cu-Zr-Cr-Pr were prepared by cast metallurgy. The effects of Zr, Cr and Pr additions on the microstructure and properties of Al-Zn-Mg-Cu alloys were investigated by optical microscopy, scanning electron microscopy, transmission electron microscopy, tensile test, polarization curve measurement, stress corrosion and exfoliation corrosion test. The results show that the combined additions of Zr, Cr and Pr to the Al-Zn-Mg-Cu alloys effectively... |
| |
| Keywords: | Pr Al-Zn-Mg-Cu alloys microstructure praseodymium mechanical properties corrosion properties |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
