Bottom nozzle failure mechanism of water reactor pressure vessel under severe accident conditions |
| |
Authors: | Young J Oh Joon Lim Kwang J Jeong Il S Hwang |
| |
Affiliation: | aDepartment of Nuclear Engineering, Seoul National University, San 56-1 Shinlim-dong, Gwanak-gu, Seoul 151-742, Republic of Korea |
| |
Abstract: | Most of past studies devoted to the creep rupture of a nuclear reactor pressure vessel (RPV) lower head under severe accident conditions, have focused on global deformation and rupture modes. Limited efforts were made on local failure modes associated with penetration nozzles as a part of TMI-2 vessel investigation project (TMI-2 VIP) in 1990s. However, it was based on an excessively simplified shear deformation model. In the present study, the mode of nozzle failure has been investigated using data and nozzle materials from Sandia National Laboratory's lower head failure experiment (SNL-LHF). Crack-like separations were revealed at the nozzle weld metal to RPV interfaces indicating the importance of normal stress component rather than the shear stress in the creep rupture. Creep rupture tests were conducted for nozzle and weld metal materials, respectively, at various temperature and stress levels. Stress distribution in the nozzle region is calculated using elastic–viscoplastic finite element analysis (FEA) using the measured properties. Calculation results are compared with earlier results based on the pure shear model of TMI-2 VIP. It is concluded from both LHF-4 nozzle examination and FEA that normal stress at the nozzle/lower head interface is the dominant driving force for the local failure. From the FEA for the nozzle weld attached in RPV, it is shown that nozzle welds failure occur by displacement controlled fracture of nozzle hole not by load controlled fracture of internal pressure. Considering these characteristics of nozzle weld failure, new concept of nozzle failure time prediction is proposed. |
| |
Keywords: | |
本文献已被 ScienceDirect 等数据库收录! |
|