| 基于虚拟样机技术的压捆机压缩装置运动学仿真 |
| |
| 引用本文： | 郑雪飞,杜健民. 基于虚拟样机技术的压捆机压缩装置运动学仿真[J]. 装备制造技术, 2010, 0(3): 3-5 |
| |
| 作者姓名： | 郑雪飞 杜健民 |
| |
| 作者单位： | 南华大学,机械工程学院,湖南,衡阳,421001 |
| |
| 基金项目： | 内蒙古自然科学基金资助项目(200711020312) |
| |
| 摘 要： | 在分析9KG-350型液压高密度压捆机压缩装置实际压缩情况的基础上,基于虚拟样机技术思想,借助三维建模软件UG建立了压缩装置的几何实体模型,然后将实体模型导入ADAMS中,在该软件平台上对压缩装置进行运动学仿真,直观清晰地演示装置的运动过程,进而获得装置的相关运动学特性曲线图,为研制与开发饲草压捆机及整机的优化设计提供了原始依据。
|
| 关 键 词： | 虚拟样机技术 压捆机 压缩装置 运动学仿真 |
Kinematical Simulation in Compression Device of Baler Based on Virtual Prototyping Technology |
| |
| ZHENG Xue-fei,DU Jian-min. Kinematical Simulation in Compression Device of Baler Based on Virtual Prototyping Technology[J]. , 2010, 0(3): 3-5 |
| |
| Authors: | ZHENG Xue-fei DU Jian-min |
| |
| Affiliation: | College of Mechanical Engineering;Nanhua University;Hengyang Hunan 421001;China |
| |
| Abstract: | Compressor is the important mechanism of baler.This paper uses the virtual prototyping technology.It analyzes the Function of Compression device in 9KG-350 high density baler and the three-dimensional digital model of compression device is obtained based on UG package.Then the model is put into ADAMS,and a kinematical analysis is performed.Through the simulation,the whole kinematical process is reflected,gaining the relative kinematical curves of Compression device as well.The results can be help in directi... |
| |
| Keywords: | virtual prototyping technology baler compression device kinematical simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
