| 多孔UHMWPE的制备与摩擦学性能研究 |
| |
| 引用本文： | 吴刚,秦红玲,赵春华,赵新泽. 多孔UHMWPE的制备与摩擦学性能研究[J]. 润滑与密封, 2011, 36(6). DOI: 10.3969/j.issn.0254-0150.2011.06.005 |
| |
| 作者姓名： | 吴刚 秦红玲 赵春华 赵新泽 |
| |
| 作者单位： | 三峡大学机械与材料学院,湖北宜昌,443002 |
| |
| 基金项目： | 国家自然科学基金项目(50905097); 湖北省教育厅基金项目(Q20091306) |
| |
| 摘 要： | 用热压成型法制备多孔超高分子量聚乙烯(UHMWPE)和普通UHMWPE试样,在改制的摩擦磨损试验机上考察2种试样在水润滑和牛血清润滑下的摩擦磨损性能。结果表明:普通UHMWPE均处于边界润滑区域;多孔UH-MWPE在较低载荷下因可以获得额外的润滑而形成混合润滑,摩擦因数和磨损量较低,其磨损机制为轻微的擦伤磨损;随着载荷的增加,多孔UHMWPE试样的磨损量明显上升并高于同等条件下普通UHMWPE,呈现较严重的切削磨损;多孔UHMWPE只适合应用于低载工况下。
|
| 关 键 词： | 超高分子量聚乙烯 多孔材料 摩擦因数 磨损量 润滑 |
The Preparation and Tribological Properties Researches of Porous UHMWPE |
| |
| Wu Gang,Qin Hongling,Zhao Chunhua,Zhao Xinze. The Preparation and Tribological Properties Researches of Porous UHMWPE[J]. Lubrication Engineering, 2011, 36(6). DOI: 10.3969/j.issn.0254-0150.2011.06.005 |
| |
| Authors: | Wu Gang Qin Hongling Zhao Chunhua Zhao Xinze |
| |
| Affiliation: | Wu Gang Qin Hongling Zhao Chunhua Zhao Xinze(College of Mechanical and Material Engineering,China Three Gorges University,Yichang Hubei 443002,China) |
| |
| Abstract: | Porous UHMWPE was prepared by heat press in metallographic sample mounting.The tribological properties of normal UHMWPE and porous UHMWPE were studied under different loads,speed and lubricant on an improved tribological test.The stribeck curves indicate that the contact surface of UHMWPE is dominated by boundary lubrication,blend lubrication section can be formed on the surface of porous UHMWPE under low loads.This is attributed to the porous structure and extrusion effect of lubricant in testing.The wear ... |
| |
| Keywords: | UHMWPE porous material friction coefficient wear loss lubrication |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
