| 基于ANSYS的水润滑橡胶合金轴承精密成型模具的优化设计 |
| |
| 引用本文： | 王家序,王少丽,肖科,田凡. 基于ANSYS的水润滑橡胶合金轴承精密成型模具的优化设计[J]. 润滑与密封, 2011, 36(7). DOI: 10.3969/j.issn.0254-0150.2011.07.021 |
| |
| 作者姓名： | 王家序 王少丽 肖科 田凡 |
| |
| 作者单位： | 重庆大学机械传动国家重点实验室 重庆400044 |
| |
| 摘 要： | 针对某水润滑橡胶合金轴承成型模具无法正常开模的问题,利用ANSYS软件对该模具进行仿真以及压力分析。结果表明,现有注压机上不能实现正常开模工序的原因是注压机的最大顶出压力小于哈夫与中模间的摩擦力。结合模具结构特点,提出了几种优化哈夫结构的措施,通过减少哈夫与中模间的接触面积和减少两者之间的摩擦因数,实现了复合橡胶轴承的顺利生产。
|
| 关 键 词： | ANSYS 模具 水润滑轴承 合金轴承 |
Optimal Design of Precise Mold of Water Lubricated Rubber Bearings Based on ANSYS |
| |
| Wang Jiaxu,Wang Shaoli,Xiao Ke,Tian Fan. Optimal Design of Precise Mold of Water Lubricated Rubber Bearings Based on ANSYS[J]. Lubrication Engineering, 2011, 36(7). DOI: 10.3969/j.issn.0254-0150.2011.07.021 |
| |
| Authors: | Wang Jiaxu Wang Shaoli Xiao Ke Tian Fan |
| |
| Affiliation: | Wang Jiaxu Wang Shaoli Xiao Ke Tian Fan(The State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400044,China) |
| |
| Abstract: | Aimed at the problem that a mold of water lubricated rubber-alloy bearing can't be pushed normally,the simulation and pressure analysis on the mold was carried out by ANSYS software.The results show that the reason that the machine can't achieve the normal push process is that the maximum push force of the machine is less than the friction force of the mold.With the mold structure,several measures were proposed to optimize the structure,by reducing the contact area and friction coefficient between huff and ... |
| |
| Keywords: | ANSYS mold water lubricated bearing alloy bearing |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
