首页 | 本学科首页   官方微博 | 高级检索  
     

泡沫级专用三(2-羟乙基)异氰尿酸酯改性蜜胺树脂
引用本文:李伟然,张汉力,刘新平,宋怀俊.泡沫级专用三(2-羟乙基)异氰尿酸酯改性蜜胺树脂[J].热固性树脂,2011(3):32-35.
作者姓名:李伟然  张汉力  刘新平  宋怀俊
作者单位:郑州大学化工与能源学院;
摘    要:采用三(2-羟乙基)异氰尿酸酯(THEIC)改性蜜胺树脂,通过粘度和力学性能测试研究了改性树脂的聚合工艺条件(如物料配比、反应时间、改性剂添加量、固含量等)对体系聚合反应及改性产物韧性的影响,采用IR光谱对改性树脂的结构进行了表征。结果表明,THEIC参与了反应,植入蜜胺树脂的分子链中,加大了三嗪环之间的距离,起到增韧改性的目的。适合发泡用THEIC改性蜜胺树脂的适宜的工艺条件为:n(M)∶n(F)=1∶2.8,pH=9.0~9.5,反应温度(95±1)℃,时间80~100 min,固体质量分数为75%,THEIC添加量为10%。

关 键 词:蜜胺树脂  三(2-羟乙基)异氰尿酸酯  韧性  拉伸强度  断裂伸长率

Foam level special tri(2-hydroxyethylisocyanurate modified melamine resin
LI Wei-ran,ZHANG Han-li,LIU Xin-ping,SONG Huai-jun.Foam level special tri(2-hydroxyethylisocyanurate modified melamine resin[J].Thermosetting Resin,2011(3):32-35.
Authors:LI Wei-ran  ZHANG Han-li  LIU Xin-ping  SONG Huai-jun
Affiliation:LI Wei-ran,ZHANG Han-li,LIU Xin-ping,SONG Huai-jun(School of Chemical Engineering and Energy,Zhengzhou University,Zhengzhou 450001,China
Abstract:The melamine resin was modified with tri(2-hydroxyethylisocyanurate.The effect of polymerization conditions(such as material ratio,reaction time,modifier amount and solid contenton the reaction and the toughness of modified product were investigated by viscosity and mechanical property tests.The structure of the modified resin was characterizied by IR.The results indicated that THEIC was involved in the reaction and embedded in the molecular chain of the melamine resin.The distance of triazine ring was incr...
Keywords:melamine resin  tri(2-hydroxyethylisocyanurate  toughness  tensile strength  elongation at break  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号