| 基于红外和声发射的复合材料疲劳损伤实时监测 |
| |
| 引用本文： | 李斌,童小燕,姚磊江,程起有.基于红外和声发射的复合材料疲劳损伤实时监测[J].机械科学与技术(西安),2011(2):191-194. |
| |
| 作者姓名： | 李斌 童小燕 姚磊江 程起有 |
| |
| 作者单位： | 西北工业大学无人机特种技术重点实验室;西北工业大学航空学院; |
| |
| 基金项目： | 国家自然科学基金项目(10702054)资助 |
| |
| 摘 要： | 采用红外热像和声发射技术,实时同步监测2D C/SiC复合材料带孔板的拉-拉疲劳损伤过程,并利用疲劳过程中模量的变化、声发射信号和试样表面温度变化,讨论了带孔板疲劳损伤演变情况.结果表明:当外加应力低于疲劳极限时,疲劳损伤在循环初始阶段产生,损伤随循环数增加逐渐增大,最后趋于稳定;当外加应力超过疲劳极限时,疲劳损伤在短...
|
| 关 键 词： | 红外热像 声发射 2DC/SiC复合材料 疲劳损伤演变 |
Real-time Monitoring of Composite Fatigue Damage Based on Infrared Thermography and Acoustic Emission |
| |
| Li Bin,Tong Xiaoyan,Yao Leijiang,Cheng Qiyou.Real-time Monitoring of Composite Fatigue Damage Based on Infrared Thermography and Acoustic Emission[J].Mechanical Science and Technology,2011(2):191-194. |
| |
| Authors: | Li Bin Tong Xiaoyan Yao Leijiang Cheng Qiyou |
| |
| Abstract: | Infrared(IR) thermography and acoustic emission(AE) were employed to synchronously monitor damage evolution of center-holed 2D C/SiC composite plate under tensile-tensile fatigue loading.Damage evolution was discussed based on the modulus,the change of AE signal and surface temperature.When the applied stress is lower than the fatigue endurance limit,the major damage is initiated in the first few cycles and went steady as cycles proceeded.When the applied stress exceeds the fatigue endurance limit,mass dama... |
| |
| Keywords: | infrared thermography acoustic emission 2D C/SiC composites fatigue damage evolution |
| 本文献已被 CNKI 等数据库收录！ |
